Community posts tagged with 'Tech Attitude'

Did You Miss Us on HSN? You Can Still Save on Craft Attitude

First, we'd like to send a big thank you to HSN for featuring Craft Attitude and Tech Attitude during its 24-hour craft special. We're thrilled to have been a part of it!

If you missed the segment, not to worry! You can still watch the episode and purchase Craft Attitude at this special HSN price. Just click here to go to HSN's site. You'll see "Live Presentation" with a small video box in the lower left corner which will allow you to watch. 

Also, be sure to visit our Projects page for lots of craft ideas you can make with Craft Attitude, as well as tons of other products available in our super store.

Tune in to Craft Attitude on HSN!

During the 4 a.m. hour, Eastern time, on July 1 (early Wednesday morning), Craft Attitude will be featured on HSN, when you can learn all about the printable original Craft Attitude printable film as well as Tech Attitude printable fabric.

Some of the projects featured include candle wraps, cell phone case covers and personalized light switch plates. Holly Fossen, who started the craft program at HSN in 2001 with her sister, will be the guest host. 


So if you're a night owl, be sure to tune in to learn about these fun projects and get some great pricing. You can also DVR/TiVo it for later, of course!

Craft Attitude Features

  • Personalize with ease right on your inkjet printer
  • Take your custom craft projects to a whole new level

Craft Attitude Film

  • Apply photos, images, logos and more to almost any surface
  • Takes on the texture of the surface and "grabs on" like skin
  • Beautiful, sharp print quality
  • Removable

Tech Attitude Fabric

  • Printable, fabric-texture sheets
  • Adhesive backing does not leave any residue so you can swap, switch, peel and replace
  • Great for decorating your phone or other electronic devices


About Holly Fossen: Holly has been on air talent/expert at HSN for 14 years. She has a passion for everything craft, with emphasis on scrapbooking, cardmaking and DIY.  She is also an international craft expert and instructor as seen at Creating Keepsakes and Scrapbook Expo conventions as well as internationally, hosted by scrapbooking centers and stores throughout the world.  

Create a Fun, Retro Photo Display

Do you love the look of retro Polaroid-like photos? You can create the same look using Tech Attitude, a printable, stickable and repositionable product that you can truly personalize. Andrea Atwater takes us through the steps:

Project Steps:

  • Using Word, PowerPoint or photo editing softward, open your favorite images to the size you choose. Make sure you leave enough room to cut out the borders for the Polaroid look. My pictures here are approximately 2.25" x 3.25".
  • Print the images out using the Tech/Locker Attitude sheets. Choose best quality and photo style in the printer options.
  • Cut the images leaving the borders to look like a Polaroid.

  • Peel and stick on the refrigerator, walls, tables, mirrors, etc., without worrying about taking the paint or varnish off. The paper does not leave any residue, and you can move and re-stick to any location with ease.

You can also use this cool look for a Save the Date wedding invite for your guests to stick up for a reminder!

Materials Used:

Tech Attitude


Scissors/cutting board

Inkjet printer

Brighten Up Your Room with Tech Attitude

Here's a quick-and-easy way to give any room an instant update: Just print the design of your choice onto Tech Attitude, then trim, peel and stick it wherever you'd like a boost of color, like we've done with these daisies. 

Tech Attitude works on nearly any hard surface, and it'll stay in place until you decide to move it. It's completely repositionable and won't damage your wall.

As the name implies, you can also use it on any of your tech items, like your smart phone or tablet. So get busy and show us what you can decorate with Tech Attitude!


7 Days of Ornaments: Day 6

Upcycle toilet paper tubes to create really pretty and unusual ornaments with print-and-stick Tech Attitude!


  • Print selected pattern on Tech Attitude into two 5” x7” size images per sheet and cut each down to 5” x 6”. Tech Attitude is a fabric with repositionable adhesive on the other side. It is printable, feels like satin, is flexible, doesn’t tear and can be repositioned, making it a better choice than paper.
  • Wrap the 5” side around the toilet paper roll – it will stick and can be adjusted – no adhesive required.
  • Fold the edges into the open ends on each side and press down and seal all around with fingers.
  • Beginning with the seam, start to add Washi tape where desired.
  • Using glue gun attach lace ribbon to inside of each open end with lace showing out of edges.
  • Decorate with selected bling in complementary colors.
  • Using glue gun adhere each end of thin gold ribbon to inside of one open edge for hanging.  The ornament is very light.
  • Loosely stuff a small piece of gold tulle into the top.
  • One package of Tech Attitude will made six ornaments.

Materials Needed:

Recycled toilet paper tubes 

Tech Attitude

Gold Metallic or Glitter Washi Tape

Lace Ribbon

Self-Adhesive Rhinestones

Gold Ribbon

Gold Tulle

Glue Gun

Now Available: Tech and Locker Attitude!

If you've gotten crafty with Scrapbooking, Decor or Jewelry Attitude, you're going to love Locker Attitude and Tech Attitude! These two products are now available to purchase on our site.

These Craft Attitude products are different from others in that they are self-adhesive, so there's no need for a glue stick or spray adhesive to get them to stick. You also do not need to print images with words in reverse as you do with other Craft Attitude products. Simply print your image with an injet printer, peel off the backing and stick your design wherever you'd like. 

Another bonus: If you stick your Tech or Locker Attitude somewhere and change your mind, it's easily repositionable. And unlike duct tape, if it happens to fold over and stick to itself -- heck, even if you wad it up in a ball -- you'll be able to easily unstick it from itself, and it will return to its normal shape. And whatever you choose to stick the print on will not be damaged, so it won't peel paint off of a locker or wall, for example. 

Teens will love to take all their selfies and stick them to their computers, phones, lockers, walls or wherever else you'll let them. Here are a few fun designs to get your creativity going. Have fun, and be sure to share your projects with our crafting community on our Facebook page so we can see your attitude!